info@mechblades.com
Request a Catalog
Paper Industry Blades

Guillotine Blades For Paper Industry

Paper slitter blades are widely used in basic paper slitting scenes, industrial paper processing and other fields, and can be applied to printing industry, packaging industry and label manufacturing industries. Through material optimization and process innovation, it covers the whole scene slitting needs from basic office paper to high-end industrial paper products.

✓ Specification review✓ Export support✓ Direct inquiry
Request a quotation

Confirm the required specification, quantity and destination.

Send Requirement →
PRODUCT DESCRIPTION

Product overview

Core Application And Technical Characteristics Of Paper Slitter Blades

1.Roll cutting: the mother roll of wide paper is cut into multiple rolls of narrow finished products by high-speed circular cutter to meet the continuous production requirements of adhesive products, label paper and so on; In the process of cutting, it is necessary to dynamically adjust the blade spacing to ensure that the cutting width error is ≤ 0.5 mm.

2.Roll-dividing processing: the paper with large roll diameter is cut into small roll diameter materials according to the preset length, which is suitable for mass production of toilet paper and printed coil materials; Combined with tension control system (such as magnetic powder clutch) to avoid paper folding or breaking.

3.Trimming and trimming: cutting off the surplus leftover materials (such as the edges of coated paper) in the paper composite process to improve the flatness and aesthetics of finished products.

 

Specific Application

1.Processing of printed matter and office paper: flat knife cutting machine: rectangular blade (blade angle 20-30) is adopted, and coated paper and A4 paper are processed in batches through hydraulic drive system (cutting force 50-200 tons), and more than 500 sheets can be cut at a time, meeting the whole edge demand before book binding.

2.Circular cutter: equipped with rotating blades with a diameter of 100-300mm, combined with magnetic powder tension control technology, the large roll of base paper is cut into narrow web with a cutting speed of 200-300 m/min, which is suitable for high-speed printing production line.

3.Cutting of packaging materials: hard packaging materials such as corrugated board and cardboard are cut with serrated blades, which reduces the risk of material tearing, and the cut burr rate is ≤0.5%. In the cutting of composite film, the circular blade can cut without burrs with micron precision (±0.1mm), which is suitable for synchronous operation of sealing machine.

4.Continuous slitting of coiled material: In the automatic production line, the slitting blade is linked with the automatic paper receiving technology to realize continuous slitting of coiled material, and the tension fluctuation of paper roll is ≤5%, thus reducing material waste. The laser positioning system cooperates with the oblique blade to finish the special-shaped cutting of label paper and art cardboard, and the error is controlled within ±0.05mm, which is suitable for high-end packaging production.

5.Special paper processing: the anti-sticking coating blade is used for cutting release paper and adhesive tape backing paper to avoid material adhesion and adapt to adhesive products industry.

6.Ultrasonic blade (vibration frequency is 20-40kHz) is used to cut multi-layer composite paper, reducing cutting debris and improving cutting cleanliness.

 

The Paper Slitter Blade Main Material Application

1.High-speed steel (HSS): wear resistance and toughness are balanced, which is suitable for cutting ordinary paper and thin plastic film at medium and low speed, with high cost performance;

2.Cemented carbide (tungsten carbide): with extremely high hardness (HRA89-93) and excellent wear resistance, it is suitable for high-speed cutting (≥ 100m/min) of high-weight paper, film covering material and metal foil;

3.stainless steel: strong corrosion resistance, suitable for high humidity or food packaging scenes, to avoid metal pollution, but low hardness and wear resistance.

4.ceramic blade: high hardness, corrosion resistance and low friction coefficient, suitable for cutting aseptic packaging paper with high hygiene standards, but brittle and easy to break;

5.plastic/polyurethane blade: lightweight and low cost, suitable for disposable label paper or low-strength cutting requirements.

6.Alloy-inlaid blade: A hard alloy cutting edge is inlaid on the steel substrate, which is suitable for high-precision cutting such as corrugated board and coated paper in combination with strength and wear resistance;

7.Titanium nitride coated blade: the surface coating reduces the cutting resistance, prolongs the service life and is suitable for high-strength continuous operation.

Material Classification And Application Scenario Of Paper Slitter Blade

application area

Suitable material

Typical scenarios and advantages

Packaging industry

Hard alloy, high-speed steel

Cut corrugated cardboard, food packaging paper, hard alloy ensures high-speed stability, stainless steel material avoids pollution;

Printing and Publishing

Inlaid alloy, high-speed steel

Copperplate paper and book pages are cut separately, and alloy blades are embedded to improve the flatness of the cutting edges, suitable for high weight paper

Label and tape processing

Ceramics, stainless steel

Cut adhesive label paper, medical tape, ceramic blades to reduce adhesion, stainless steel material to prevent rust

Special material processing

Hard alloy, titanium nitride coating

Cutting metal foil and insulation paper, wear-resistant hard alloy, and coated blades to reduce cutting resistance;

 

Shape Classification And Adaptation Scenarios Of Paper Slitting Machine Blades

Blade Shape

Adapt to Paper Thickness

Advantage Scenarios

Typical Application Cases

Single Sided Square Blade

70-130 μ m thick cardboard

Rigid slitting of corrugated paper

Processing of cardboard boxes and cutting of cushioning materials

Double Sided Square Blade

PRODUCT GALLERY

View product details.

KEY ADVANTAGES

Designed for confident sourcing.

FAQ

Frequently Asked Questions

Common purchasing and product questions answered before you send an inquiry.

Product FAQs are being prepared.

RELATED PRODUCTS

More from this collection.

View Category →
Paper Circular Slitter Blades
Paper Industry Blades

Paper Circular Slitter Blades

Through the combination optimization of shape and material (high speed steel, cemented carbide, etc.), the paper cutter blade can accurately adapt to the diversified cutting needs of printing, packaging and other scenes.

Paper Shredding Blades
Paper Industry Blades

Paper Shredding Blades

Pulverizing knives in the paper industry are widely used in the fields of waste paper recycling and recycling, industrial production-grade pulp preparation and high-precision specialty paper processing, etc. They are widely used in the production of recycled paper, packaging material recycling and environmental protection treatment, etc. Through diversified knife design and intelligent technology integration, the whole industry chain needs from basic waste paper recycling to high-value paper recycling are covered.

Die-Cutting Tool For Paper Industry
Paper Industry Blades

Die-Cutting Tool For Paper Industry

Die-cutting tools in paper industry are widely used in the fields of packaging printed matter processing, digital electronic supporting paper products, special paper products processing and industrial packaging materials cooling. Through technical iteration and multi-scene adaptation, they have become the core tools for paper industry to achieve high precision and high efficiency processing.

Blades For Paper Pulping Industry
Paper Industry Blades

Blades For Paper Pulping Industry

Paper industry pulping blades are widely used in fields such as waste paper recycling, pulp preparation, and industrial pulp pretreatment; Through the collaborative application of pulping and cutting equipment, the paper industry has achieved efficient operation throughout the entire process from waste paper recycling to high-precision finished product processing.

Corrugated Paper Processing Blade
Paper Industry Blades

Corrugated Paper Processing Blade

Corrugated paper processing blades are used for corrugated paper processing, mostly for batch cutting of special-shaped cartons and gift boxes, as well as cutting of composite films (paper-plastic materials) to meet the diverse needs from packaging cartons to special materials.

Ready to source

Send specifications and get a factory quotation.

Request a Catalog