info@mechblades.com
Request a Catalog
Blades For Steel Rolls Processing In Steel Mills

Steel Mill Spacer

In the slitting process of metal thin plates such as stainless steel, aluminum plates, and copper plates, as well as in the slitting of cold-rolled steel plates, hot-rolled steel plates, and pickled plates, spacers and washers are used to control the spacing between slitting blades and adjust the horizontal gap between upper and lower blades to ensure the accuracy of slitting width and cutting stability. They are indispensable components in widely used production. Welcome to ask us related questions

✓ Specification review✓ Export support✓ Direct inquiry
Request a quotation

Confirm the required specification, quantity and destination.

Send Requirement →
PRODUCT DESCRIPTION

Product overview

Typical Application Scenarios

Metal processing: steel strip pickling process, steel strip longitudinal cutting process, stainless steel, automotive plate slitting using metal spacers, matched with precision gaskets to adjust gaps.

Core function: The spacer and gasket are used to control the spacing between the slitting blades and adjust the horizontal gap between the upper and lower blades, ensuring the accuracy of slitting width and cutting stability.

The adjustment methods include manually increasing or decreasing the thickness of the gasket or quickly adjusting the spacing through patented sliding components (such as sliding sleeves and positioning rods) to reduce downtime.

 

Common Materials For Dividing Blade Spacer And Gasket

65Mn Spring Steel: High carbon spring steel with a hardness of HRC38-42, combining wear resistance and toughness, widely used in metal sheet slitting scenarios. The surface is treated with chrome plating or blackening to enhance rust resistance and adapt to high humidity or corrosive environments.

Alloy tool steel: such as Cr12MoV, 6CrW2Si, etc., suitable for high load shear scenarios (such as stainless steel, automotive plate slitting), with strong impact resistance, avoiding gap expansion caused by metal debris wear. It is necessary to cooperate with heat treatment processes such as vacuum quenching to ensure uniformity of hardness. ‌

Rubber/polyurethane: used for slitting non-metallic materials (such as paper, film, non-woven fabric) to avoid scratching the surface of the material, and the encapsulation process can improve wear resistance. The thickness tolerance is ± 0.1mm, and it needs to be replaced regularly to maintain elasticity and sealing. The thickness range covers 0.8-150mm, and the tolerance is strictly controlled within ≤ 0.003mm to ensure assembly accuracy.

High molecular weight polymers, such as Teflon or wear-resistant plastics, are suitable for high temperatures or complex working conditions, reducing metal debris adhesion and extending service life.

 

Key Parameters

Thickness tolerance: ≤ 0.003mm (metal spacer) or ± 0.1mm (rubber spacer).

Inner hole and outer circle fit: with a tolerance of ≤ 0.003mm to prevent vibration displacement during high-speed operation.

Surface treatment: Blackening treatment (rust prevention) or titanium plating (improving wear resistance).

Surface Treatment Process

Chrome plating: enhances rust resistance and wear resistance, suitable for metal spacers.

Blackening treatment: improves rust prevention performance, commonly seen in the mating parts of knife shafts.

Gluing process: Rubber or polyurethane material surface is coated with glue to enhance wear resistance and impact resistance.

 

Selection Principle

Metal plate slitting: 65Mn or alloy tool steel material spacers are preferred with a tolerance of ≤ 0.003mm to ensure wear resistance and assembly accuracy.

Non metallic material slitting: Choose rubber or polyurethane gaskets to protect the integrity of the material edges.

High temperature/high humidity environment: Made of polymer materials or chrome plated on the surface, suitable for complex working conditions.

 

Application And Maintenance Standards

Installation and adjustment: The total thickness of the blade stack should be ≤ 300mm, and the spacers should be arranged in the order of thickness to avoid cumulative errors affecting the slitting accuracy.

When using adjustment components (such as sliding sleeves and positioning rods) to quickly adjust the spacing, it is necessary to ensure the stability of the fit between the fixed column and the sliding groove.

Maintenance requirement: Regularly check the wear of the spacer surface. If there are obvious scratches or deformations, they need to be replaced to prevent deviation in the strip width.

Clean the remaining metal debris or glue between the blades to avoid equipment failure caused by jamming.

Note: The spacer and gasket are key components for strip accuracy and efficiency, and should be selected comprehensively based on material characteristics, operating conditions, and equipment requirements. The material of the spacer and gasket should be selected based on the strip material characteristics, equipment load, and environmental conditions to ensure strip accuracy and equipment stability.

PRODUCT GALLERY

View product details.

KEY ADVANTAGES

Designed for confident sourcing.

FAQ

Frequently Asked Questions

Common purchasing and product questions answered before you send an inquiry.

Product FAQs are being prepared.

RELATED PRODUCTS

More from this collection.

View Category →
Circular Slitter Blades
Blades For Steel Rolls Processing In Steel Mills

Circular Slitter Blades

The slitting disc cutter is widely used in slitting of thin metal plates such as stainless steel, aluminum plate and copper plate. In slitting of cold-rolled steel plates, hot-rolled steel plates and pickling plates, the slitting disc cutter made of cemented carbide or high-speed steel can ensure smooth cut, reduce material loss and improve yield. Our company has 30 years' experience in producing slitting disc cutters for metal industry, and we design and produce blades with various functions and occasions for customers. Welcome to ask us related questions.

Guillotine Shear Blades
Blades For Steel Rolls Processing In Steel Mills

Guillotine Shear Blades

The blade of the hydraulic shearing machine is the core cutting component of the hydraulic shearing machine. Its function and working process: It consists of a moving upper blade and a fixed lower blade. The upper blade is driven by a hydraulic system to apply shear force to the metal sheet, while the lower blade provides support. The blade gap is adjusted reasonably, and the shear stress is used to break and separate the sheet according to the set size, thus achieving its cutting function.

Hss Circular Saw Blades
Blades For Steel Rolls Processing In Steel Mills

Hss Circular Saw Blades

High speed steel circular saw blade (HSS circular saw blade) is an efficient tool specifically designed for metal cutting. When used in conjunction with a specialized metal circular saw machine, it can cover diverse processing needs from thin plates to thick materials by adjusting the tooth pitch and line speed. It has become the core tool for cutting, slotting, and other processes in metal processing, especially suitable for efficient production in fields such as automotive, aviation, and machinery manufacturing.

Tube Slitting Cutter Knife
Blades For Steel Rolls Processing In Steel Mills

Tube Slitting Cutter Knife

Cutting blades for steel pipes have the characteristics of high wear resistance, high hardness and strength, efficient cutting and high precision, thermal stability, etc., which have shown significant advantages in efficient operations in fields such as construction engineering, machinery manufacturing, energy and chemical engineering, and have been widely used.

Steel Bar Cutting Blades
Blades For Steel Rolls Processing In Steel Mills

Steel Bar Cutting Blades

The steel bar cutting blade has the characteristics of high-strength material and process, precision structural design, thermal stability and wear resistance. When combined with sawing machines and pipe cutting machines or handheld or fixed equipment, it can achieve safe and efficient cutting of steel bars, and is widely used in the fields of construction engineering, industrial manufacturing, demolition and recycling. ‌

Precision Steel Rollers
Blades For Steel Rolls Processing In Steel Mills

Precision Steel Rollers

The precision rolling mill adjusts the gap between the rolling rolls to eliminate defects such as wave and bending in the strip, ensuring the flatness of the plate and achieving shape control and straightening of the steel strip. The precision rolling mill, through high-precision structural design and advanced surface treatment technology, has become the core component for improving strip quality and production efficiency in the straightening process.

Ready to source

Send specifications and get a factory quotation.

Request a Catalog